Minimum Version Required:
To perform an installation you will need the IP address of the PBX.
Only one CTI application be connected directly at a time to the Panasonic. To connect more than one CTI application the Panasonic Multiplexer (MUX) is required. This is licensed separately.
Go Connect Server detects "connected" handsets to prevent downloading too many devices. If unconnected devices are required they can be added manually.
“The information presented on this page is based on testing with manufacturer handsets that are fully compatible with the PBX CTI Interface. For clarity KX-HDV handsets are not fully compatible unless operated in uaCSTA mode – see uaCSTA PBX type for more information”
This PBX is now End of life by Panasonic.
TCP: 33333 and MUX 33332
This PBX is end of life. The Panasonic connects to the LAN via the RJ45 socket on the main unit. The local IP address and other network settings are set through the programming software.
Firmware Requirements (for new installations):
KX-TDA: 5.0022 (IP-Gateway: 1.401)
KX-TDE 100-200: 3.0007
KX-TDE 600: 3.0012
On the TDA15 and TDA30, an IP-Gateway is required.
On the TDA100 and TDA200 a CTI Link card is required
|WAN Connectivity||Trunk Monitoring||Analog Phones Supported||Agent Features Supported|